Tips to Car Waxing

unduhan-6In the event that you need to give your auto a new and stupendous look, consequently keeping it sparkling and fresh out of the box new, then what you need is some compelling auto waxing tips to make your employment all that less demanding.

I am sure everyone has experienced the exhilarating feeling of buying something you’ve longed for, that too with your hard-earned money. The same holds true when you buy a car. A car is more than just a vehicle, it is an investment. Your car can look brand new for a very long time if you know the right methods of car maintenance. The car waxing tips in this article will help keep the external body of your car look new as ever!

Waxing your car serves a dual purpose. It not only lends a natural shine to your car but also protects its paint from harsh conditions like rain and heat. No matter how careful you try to be, it is impossible to keep your car completely away from minor scratches and chips. Car wax helps in reducing the visibility of these damages by forming a thin transparent layer over the paint. Corrosion can also be prevented by car wax as it seals the paint and prevents water from having direct contact with the metal of the car. None of the wax products are permanent, thus the car needs to be waxed regularly for best possible results. The best wax products will stay intact for a period of three months, and you can use them for optimum benefit. Car waxing plays a critical role, not only in maintenance of the car, but will also increase the resale value of the car. It can keep your used car looking outstanding!

Techniques
Before you begin waxing, the surface of the car needs to be washed clean or the grit will get scrubbed into the surface causing it to scratch the paint.
Use a good quality applicator, like a microfiber sponge.
The method you use to apply the wax is also very important. For the hood, roof and the trunk, the most effective way of applying the wax is from front to back. Whereas, on the side panels, apply the wax using up-down motions.
Many have a doubt of how much wax needs to be applied. Well, a thin layer of wax gives the best result, besides the excess wax is going to be wiped out anyway. You can keep the applicator slightly moist at all times for best results. Keep a small bucket or a water hand spray handy.
Now that the wax has been applied, you need to carefully remove it. How long you leave the wax on the car depends on the manufacturer’s instructions. Some recommend the wax be removed immediately while others say that it should be kept for drying at least for 15 minutes.
Remove the wax with a clean towel. Make sure you keep turning the towel and do not use the same side again to avoid any foreign particles from scrubbing against the car surface. In case the towel touches the ground or becomes dirty, use another towel. Also, it is better if you use several small towels. This is because there is a high possibility that large towels will touch the ground easily and carry the dirt and foreign particles like dust and tiny substances. Also, you have to keep folding the towel very often.
This said, the type of towel you use will also make a difference. 100% cotton or microfiber towels give good results. It has been observed that microfiber towels give a better shine as fiber aids in removing the wax better. But be cautious not to use a fabric softener for the microfiber. A cotton towel gives good results as well, and when washed after use, it does not hold on to any wax, unlike the microfiber towels.
Tips
Now that you know the basic techniques, here are some quick tips you can follow to keep your car shiny and radiant.

  • Always start with washing your car and drying it with a soft cloth. If the car remains wet, it won’t give the required effect.
  • It is of extreme importance to choose the right kind of car wax. Some can be very effective, while others are rough. You can go for colored car wax, but choosing the right shade is very important.
  • Also, never polish or wax your car in direct sunlight. This causes the wax to dry off fast and makes it difficult to remove later.
  • It is best to keep the applicator damp for better results.
  • In case you are using a liquid car wax, then make sure to shake the bottle well before use.
  • Always keep a spare towel handy.
  • Do not touch the windows, glass surfaces or rubber trims while waxing. It might become difficult to remove the wax from these areas later.
  • Work in small sections and start removing the wax from where you started applying first.
  • If you use the same towels for waxing the car, make sure they are washed clean.

I am sure these tips will help your car look gleaming and attractive. So go for that stunning shine and give a new look to your car.

Car Waxing Tools Tips

On the off chance that you want to keep your autos spic and traverse, it’s vital that you wax them convenient. For that, the instruments said in this article will demonstrate vital.

The shine that your car will get after you wax it, will not only make it look good, but also protect the car’s paint from harmful environmental influences like salt, UV rays, insects, acid rains, and bird droppings. Even light scratches disappear after few sessions of waxing. While buying the equipment you need for this job, it’s very important to check it properly. Some tools have abrasives, which can actually cause damage to the car’s paint. Carnauba Wax is considered the best wax; it is easy to apply and remove, albeit a little expensive.

Best Wax Tools for Your Car

Most stores have an entire car waxing tool kit, which has all the possible tools you might require for the job. However, it is advisable that you buy both the options available―electric and hand.

Electric Waxing Tools
The market is filled with electronic tools, which can actually make your job quick and easy. For instance, see the orbital wax buffer tool which is used to apply the coating to the car without the risk of scratches. The buffer can also be used as a sander, which is helpful for removing corrosion and damage from the car’s paint, before you begin waxing it.

Hand Waxing Tools
Use a wax pad plus holder and you can have a smooth wax session over your car. Purchase some extra hand towels which will help you to apply the wax to the surface of the car.

Don’t be under the impression that car waxing is necessary only once a year. These products are effective only if you use them at least thrice a year. Before buying any of the following tools, do read some reviews; you will get a better knowledge about the products. Always remember that before waxing, your car needs a proper wash. You can actually visit a decor showroom and book it for a wash.

After you have applied all the car wax, you need some removal tools to remove the extra wax. You can use the wax remover with buffing tools to get maximum effect. A wax removal bonnet in your hand can also come in handy as it fits over your fingers like a glove.

I hope with this article you’ve understood how to go about the entire process. Always remember you need to cater to the luster of your car paint by applying only the best car waxing products available in the market.

Tips to Properly Wax a Black Car

You should be amazingly cautious while selecting auto wax for dark autos. Aside from that, you likewise need to know the best possible approach to utilize it.

Every car owner is quite possessive about his or her vehicle. No matter what, they also find enough time to manage all the troubles that are needed to keep it as good as new. It is the reason why along with car servicing, car wash becomes an integral part of their routine. Car cleaning is a process that includes car polishing and car waxing. Both these things make sure that your car doesn’t lose its original appearance because of the consistent attacks of grime and rust. When it is a shiny black car, which is often cited as an utter mark of sophistication, these maintenance routines seem somewhat mandatory. People owning black cars or cars in any other dark color for that matter, need to be aware that their slightest mistake while selecting car wax may cost them the precious car paint.

Selecting Car Wax for Black Cars

At first, remember that the usual best car wax products do work on black cars. But the thing is one cannot fill up the dents, scratches, and streaks on black car paint with a green or white wax, since they will only highlight the damaged part of the car. It is the reason why there is a need to find out the best black wax. It is available in powder/paste, liquid, and spray form and you can select any of these, depending on your requirements. Spray on and powder black car wax products are used as they yield quick results and retain good car paint conditions. However, liquid products are widely selected since they last longer.

All in all, you need to make a comparison and then only make an appropriate selection. Some popular products include Pinnacle Souveran (carnauba paste wax), Meguair’s Hi Tech Yellow Wax (Meguiar’s #26), Turtle Wax Black Box, Black Velvet Carnauba Wax, Zymol Ebony Wax, Black Magic Wet Shine Liquid Wax, Mothers California Gold Original Formula Carnauba Cleaner Wax, Collinite No. 845 Insulator Wax, 3M Perfect-it Show Car Liquid Wax 39026, Armor All Car Wax, Eagle One Wax-As-U-Dry, Nu Finish NFP-80, and many more. Once you select the proper wax, you also need to get to know the best way to apply it on your car.

Proper Way to Wax a Black Car

The first thing that you need to do is to wash the car, so that all the grime is removed. Once that is done, make sure that there are no scratches on the car’s exterior. If you find scratches, then make it a point to polish the car with a good quality car polish product. Then apply a good quality masking tape on the cervices of the car, so that the wax doesn’t enter them. Once the car is dry, park it in shade and then use a good quality wax remover and remove all the existing car wax from your car.

Always apply the wax by sectioning car exterior, which means, avoid applying it on the entire car exterior at a time. Also, use the recommended amount, since excess of it can contribute to a messy application. Then, you can either use the car wax buffer or apply it by hand (by a cotton cloth that is). Make sure that you apply it on the car’s exterior in a straight line. Once the wax starts to turn opaque, you need to remove it with the help of a terry cloth. However, make sure that the wax removal is done before it dries out completely.

Water bead formation on the exterior of the car is the best sign of a good quality car waxing.

Ways to Use a Rubbing Compound on a Car

A rubbing compound is utilized on autos to dispose of minor scratches and hold the radiance of the paint. Know how to utilize rubbing compound for your auto to make it look sparkling and new.

Sometimes your car could be an embarrassment, especially if it’s all dusty and unclean. If you got to attend a very important party or social gathering, your car should necessarily match your level of prestige and dignity. A dirty car would make a real bad impression, and would leave you feeling miserable.

A good way to deal with an unclean car is to buff or polish it with some rubbing compound. Rubbing compounds help to get rid of dirt deposits that make the paint look dull and faded, and freshen the color of your car making it look shiny and sparkling. They are also useful to remove minor scratches and stains.

Use a rubbing compound on your car by referring to the steps given below.

How to Use a Rubbing Compound

Begin with washing the car. Use a good car shampoo and soap the car thoroughly, following which you can rinse the car and allow it to dry under the sun.

You’ll need to buy a good rubbing compound; look for products from popular companies like Turtle or 3M. You could either apply the compound with a buffer or by hand using a terry/microfiber cloth.

Take about a teaspoon of compound on the buffing pad or the cloth, and work in small sections (1-2 ft.), ultimately covering the whole car. Apply the compound in a circular motion, and not in straight strokes as it could leave stains later.

You could ideally begin with the top and then buff all the way to the sides, and not the converse, as you would have to lean over to clean the roof, with most of the previously applied compound ending up on your clothes.

Work each section thoroughly till the compound is gone. After completing a section, rinse it with water and wipe it with a microfiber cloth.

Once you finish the whole car, check for any spots that you missed or need a little more shine, and work on them again.

Once done, you could rinse the whole car and let it sun dry to get rid of any leftover compound.

Apply some wax for a glaze, and arrive in style at the next party or social gathering.