Vinyl Paint for Car Interior Tips

unduhan-7Painting the insides of an auto is a simple employment, and nothing can be preferable for this over vinyl paint. You will have the capacity to change the whole look of your vehicle from within. This article makes you through the strides of painting the auto insides.

Vinyl paint can give your car a new look from the inside. Moreover, you will get that feel-good factor while driving your vehicle. You can get a dashboard color you always wanted to have. If you want to do an affordable makeover to your vehicle, then you can opt for painting the interiors, especially the dash, door panels, leather items, and other plastic areas. It promises to give your vehicle a new life.


To paint the dashboard, you will need to remove the peripherals like the gear shift knobs, radio knobs, ashtray, heater vents, etc. You may also want to wash them in warm soapy water. Make sure that they dry well, you can also use a blower to dry them. Then, with a clean cloth and soapy water, wash the dashboard, steering wheel, door knobs, etc. You may need to brush a little harder, maybe with a scrub to get the dirt off properly. Then, rinse the dashboard and dry it with a clean cloth.

If you don’t want some areas to be painted, you can apply masking tape on areas like the radio gauge, etc. Painter’s masking tape is the best for these kinds of jobs as it can be peeled off easily and it doesn’t leave any residue behind. To apply paint on hard plastic areas, you may first need to rub it gently with a fine sandpaper. Then, using a soft, dry cloth, wipe off the dust which was produced by the sandpaper. Wipe it once more with a wet cloth, which will make sure that there is no dust on it. Lastly, using a clean cloth and rubbing alcohol, wipe the plastic and the dashboard, this will make sure that there is no residue on it.

Before you start painting, be sure that it has dried so that the paint sticks effectively. Use a good quality primer on the areas you want to paint. Read the manufacturer’s directions for best results. Another important aspect is the type of paint you use. If you want to apply it on plastic, use a paint which is suitable for plastic, and likewise for other material. Vinyl plastic paint may produce better results. For the dashboard, you can use vinyl dash paint. Follow the manufacturer’s directions for better results for the paint as well.

If you’re thinking of applying it to the seats, then make sure you use the right product for it, as there are products out there specially made for these purposes. You may use vinyl upholstery paint for this. After applying one coat, let it dry thoroughly, undisturbed. Let the windows down so that it dries properly. It may take 24 hours or more for it to dry. After finishing, the interiors must be looking like that of a brand new vehicle. Install the peripherals which you had removed earlier back. Test the controls to make sure they’re working right. You can also consider changing your vehicle’s interior design.

What Products to Use?

Not many think of painting the inside of a new vehicle; you can do it if you want to lighten up the color a bit. You can use duplicolor vinyl or vinyl spray paint for the job. Most of the products available for these jobs come in spray cans, hence it becomes simpler for you to apply. Depending upon the shade you want, apply multiple coats if required. The more coats you apply, the darker the shade will be. While spray painting, keep the nozzle at a distance of about 16-18 inches and apply it in a smooth back-and-forth motion.

The prices of hiring a professional can be relatively high, so you may consider doing it at home, which will help you to save a lot. After completing the job, make sure that you take proper care of your vehicle by taking few simple precautions like protecting the vehicle from direct sun, protecting the dash, etc. Using a window sun blocker will help to a great extent. With proper care, the paint will last for years.

Tips to Custom Car Painting

Some time ago car paints were extremely restricted similarly as the shades of hues were accessible. Autos in the prior days were accessible either in essential white or dark shades. In any case, as the interest for the hues developed, so did the experimentation for the same to the extent auto producers were concerned.

Today, car painting does not mean choosing only the right shade. One has to consider factors such as whether the paints are rust-free and scratch-proof. There are many different qualities available. Here, cost is also an important factor. For example, the polyurethanes are generally at a higher end. There are also lower-grade qualities available of this kind. This is because of a certain pigment used in them that makes it a tad expensive. The least quality is that of the acrylic enamels. The difference between them, apart from the price factor, is the durability of the paint. If you take a trip through any company that specializes in custom car paint jobs, you can get a variety of such paints available with their various categories and prices.

Every painter has his/her own recipe. People have even known to change the basic look of the car or even the performance of the car (by replacing the engine) if they want a custom car as per their desire. This always adds a personal touch to the model. Once the basic body structure is changed, the paint always remains to be the most important step. The 1960s saw the use of wildly colored candy apple paint applied atop a metallic coat. There was also an addition of glitter and the use of multiple coats that produced a sparkling effect. These car enthusiasts were also known to add decorative coats of paint in the shape of flames, pinstripes etc., over these coats.

Logo Designs

Apart from long flames on the car, paint also got a new twist in the story. Today, there is a growing demand for logo designs. These are mainly popular amongst most car and bike enthusiasts as they can change the entire look of a plain car into a very eye-catching one. Many people use these logos as a representation of the company or for personal use. Here, the painter has to take care that the color scheme used for the logo should match the basic color and look of the car. Most people today love to go in for a fiery car paint color that is bold and makes a statement. These can even be seen at a longer distance. Serif fonts or delicate fonts are generally avoidable. This is because they may not always be visible at a distance. If the reasons are professional and you need to display a website address, always consider the font and use contrasting colors for better readability.

When it comes to automotive logo designs, one has to consider the objective of the design, the quality required, and the extent to which your creativity can be unleashed. Sometimes, the designers use the different components of the car such as the handles, steering wheels etc., to display some more creative logos. Some of them break the traditional norms and implement trendy designs that look very creative and bring a ‘designer’ touch to the car.

Now that people are becoming interested, a lot of manufacturers are providing many more variations of car paints and colors. Now, the trend has shifted to high-tech, color-shifting paints that also change hue as the car is rotated in the light. Such paints contain little flakes of pigment that bring about the change in color. These are especially popular whilst painting graphics and creating different backgrounds. They are also useful on the interiors of the car.

A Guide Car Painting for Car

The car business has been a noteworthy casualty of the subsidence. On the off chance that you are considering eliminating your costs, then your auto is certain to be the main casualty. You begin ignoring the minor issues of your auto, overlook giving it a costly paint work.

Tips and Techniques

Step 1: Gathering Material
Make a list of things that you will need, beforehand, and keep them ready. Here is a list of things that you will need.

  • Plastic sheets or waterproof canvas for covering the car.
  • Sandpaper for sanding down the surface of the car.
  • Primer (the quantity depending upon the size).
  • Paint. There are two types of paint, cellulose based and two pack automotive paint. Choose the type of paint depending upon the age of the car. For old, classic cars, it is preferable to use cellulose based paint, and for newer cars, it is preferable to use two pack automotive paint.
  • Clothes, mask and goggles for covering all the exposed areas of the body.
  • Sprayer for spraying the paint on the car.
  • Clear coat kit to give the finished look to the car.

Step 2: Cleaning
It is absolutely imperative to work on a clean car, whenever you are getting a paint job done. This is because dust is the greatest enemy of wet car paint. Once the dust is settled on the wet paint, it is impossible to remove it. So, the first and foremost step recommended is to wash your car properly, so that any unwanted foreign material is removed.

Step 3: Sanding Down
The paint should only be applied to a smooth area. For this, you will have to sand down the car. The surface of the car has a tendency to have some fine holes in it. You can use putty to fill up these fine holes, and then proceed to sand down the car. Use a sandpaper to do this. In this step, all the colors should be scrapped down.

Step 4: Preparation Before Painting
You cannot apply paint on a wet surface. Make sure that the car is completely dry before painting it. Next would be to cover the area of the car that you don’t want the paint to get on, like windows, windshield, car interiors, etc. Use the waterproof material that you gathered before, for this purpose. Use a masking tape to keep the material in place.

Step 5: Priming
A primer is something that is applied before painting. A primer is necessary for better adhesion of the paint. Priming should be done in an indoor setting only. Care must be taken that there is adequate ventilation also. See to it that you are well clothed, so that there is no exposed skin surface.

Step 6: Painting
Before you begin painting the car, sand down your car again. All the primer must be removed. This is because the paint has to be applied to a smooth area. Hence, scrubbing down all the primer is important. Make sure that there are is no area on the car that hasn’t been sanded down. The surface must be completely smooth before you apply the paint.

Using a sprayer, you a can apply the first coat of car paint to the car surface. Apply the first coat smoothly all over the surface for the car. Once this is done, it is important to let the paint dry. This should take about 20 minutes. Now you can apply the second coat. The second coat should also be applied smoothly all over the car. The paint now needs to dry properly. Two hours should be sufficient for this.

Step 7: Clear Coat
The procedure to apply the clean coat is the same as that of the paint. Just apply smoothly all over the surface of the car. It is advisable to apply three coats of clear paint, with a gap of at least 20 minutes between each clear coat. After this, let the car dry for at least 2 hours. Your car should now look brand new! Note that in the tips mentioned above, none of the steps can be skipped. So, follow them properly.

There are numerous car painting techniques, but the tips given in this guide are designed to give your car a perfect paint job. Follow them and get a brand new looking car.

Ways to Paint a Car

Painting a vehicle is not as troublesome the same number of individuals think, if you take after the directions fastidiously. In this article, different strides with respect to the method to paint an auto are talked about.

When you have plans for painting a car on your own, one thing is for sure that the result is really rewarding and satisfying, and will save you a lot of money too. It is the best way to change the look of your vehicle. Even if you have never done this kind of paint job before, you can succeed in your venture, provided you have the patience to comply with all the relevant instructions.

Step # 1

No matter how well-maintained your vehicle is, it is exposed to loads of dust, grime, and debris. Therefore, the first step is to wash your car. This is done to ensure proper adhesion of the paint. Firstly, wash your vehicle with soap and water. This will clean up all the loosely bound particles from the body. Then, apply a grease remover to get rid of the stains and marks that are insoluble in water. Liquid charcoal starter or mineral spirits can also impart effective results.

Step # 2

Rough, scratched, and dented surfaces of the car’s body prevent the required finish after painting. Thus, you have to treat them with sandpaper in order to smoothen them up. Identify all such spots on the car that require some amount of repairing or sanding. If the rough surface area is large or the scratch marks are deep, then you can rub with a loose grit sandpaper. For small patches, where minor sanding is required, a fine grit will be just enough. Any kind of minor or major dents on the vehicle body should be mended before you take up the paint job. Putty material is the best choice for filling up such dips, and to make the surface leveled. After this repair work, you should do another round of sanding to make the repaired patches smooth. If you find lots of dust on the surface due to this method, wash it once more.

Step # 3

Your paint job can be started only after your car has dried up thoroughly. For this, even if you have to wait for few hours, do not hesitate to do so. Cover up all the portions of the vehicle where painting is not required, like mirrors, glass, window frames, door handle, etc. Masking tape is the best option for this purpose. Make sure there are no holes and gaps in the tapes, through which paint can seep into those areas.

Step # 4

Now that your car is ready, you can begin the paint work. It should start with the application of a primer. This is responsible for making a strong bond between the vehicle surface and the paint layers, so that the latter will last for some more time. Read the instructions given on the label of the primers carefully. Some varieties require application of double coats. Apply the ones on all the areas on the car, where paint has to be applied. Make sure that the primer is spread evenly on the surface. Keep its coat slightly thicker on those areas, where repair work of dent and scratches were done. This will make those surfaces even. Let the primer cure up completely. It often happens that small lumps and dips are caused by such compounds. These uneven surfaces should be smoothed out by another round of sanding.

Step # 5

Urethane based paints are the best ones for your car. Firstly, apply a base coat of paint using a spray gun, and allow it to dry up for about 15 minutes. Then, put another coat of paint. Normally, two coats are sufficient to get the desired effect. However, if you have selected any such paint that has instructions to apply it more than two coatings, then do it accordingly. The second coat needs a couple of hours to dry. When the final coat of paint has dried up, you have to give it a finishing touch by applying a clear coat. It is normally applied three times, and in the same way as of the previous ones. Allow the car to dry for one and half hours or so.

There should be proper ventilation in the place where the paint job will be carried out. You should gear up with suitable precautions to protect yourself from harmful fumes of the paint and of the primer. Choose loose fitting clothes that will cover your entire body well. Masks and eye glasses are also a must for this kind of work.