Ways to Paint a Car Matte Black

Painting your auto independent from anyone else sounds somewhat precarious, however it’s genuine fun, and above all, less expensive than those exceptionally costly auto paint shops. Underneath clarified is one of the least expensive strategy to paint your auto with no expert help or the utilization of hey fi instruments.

It’s always good to start with an old used car if you’re painting a car for the first time. With patience, neatness, and the right set of skills, you could make your car looking new and beautiful again. Avoid trying this on a not-very-old car or a new car, as you might end up ruining the stock paint. This guide isn’t for a perfect factory-level paint job, so do not expect extremely good results.

Car painting is not a cakewalk. It needs to be done with utmost caution and with proper safety measures in place. Use a properly ventilated spot to carry out this task. You could also use your backyard for that matter, or any open area. So let’s get going. Take a look at what all you will need, and then we’ll move on to the steps to begin painting your ride.

Things You Will Need

  • Sandpaper (120, 600, 1,200, and 1,500 grits)
  • Self-etching primer (5 – 8 cans)
  • Matte paint (12 – 15 cans)
  • Car wash shampoo
  • Garden hose
  • Masking tape and newspaper
  • Water spraying bottle
  • Denatured alcohol
  • Grease cutting solution
  • Safety equipment (latex gloves, respirator, safety glasses)

Estimated Cost: $500 – 600

How to Paint a Car Matte Black

Washing the car

Step 1
Give your car a proper wash, and allow it to air-dry before beginning the painting process.

Step 2
Once dry, take off all the detachable parts, like the lights, trims, mirrors, etc., trying to minimize the do-not-paint areas.

Step 3
Now, begin dry sanding the surface with the 120-grit sandpaper to scuff up the imperfections and defects of the old paint. Sand to expose the bare metal under the paint.

Step 4
Clean the whole car thoroughly with denatured alcohol to get rid of dirt and oil on the surface.

Step 5
Use the newspaper and masking tape to cover the areas which you don’t want to paint. These areas include the windshield, windows, sunroof (if the car has one), door handles (if not body colored), mirrors, grills, and the like. Use a good quality masking tape to ensure proper sealing. If there are holes in the tape, or if the adhesive of the tape isn’t good enough, there is a possibility that the over-sprayed paint might stain these parts.

Step 6
Prime all surfaces by applying enough paint to fill scratches and pits which you encountered during sanding. Priming should make the surface of the car even and smooth, which is essential for better application of the paint.

Let the primer cure thoroughly. Usually, it would take 2 – 3 hours for the primer to dry, but do check the instructions on the container, as the drying time might vary with different brands. Also, check if multiple coats are required. If yes, then give a second coat when the first one has dried completely.

Step 7
Once the primer is dry, wet-sand the surface with the 600-grit sandpaper. This would smoothen any areas with drips or blots of primer. Even though this is a less coarser sandpaper, do not sand too roughly, or you would expose the metal all over again.

Step 8
Degrease all the surfaces using the solution and clean thoroughly to eliminate any dust or other particles accumulated during priming.

Step 9
Now for the paint. Read the instructions on the paint can properly. An advantage of canned paints is that one wouldn’t require a separate sprayer or thinning of the paint. Always remember to paint in a side-to-side sweeping motion, covering as much area possible. Try to be somewhat perfect with this coat, as this is the final step in the actual painting process.

Step 10
Now that you’ve painted the whole car, give it time to dry. On an average, canned paints should dry within 24 hours (follow the instructions on the can). Let the paint cure thoroughly; avoid driving or exposing the car to dust and dirt during the curing process.

Step 11
After the paint is completely dry, wet-sand it with the 1,200-grit paper until all the surfaces look perfectly smooth and finished. Rinse any residue and let the car dry. Do not buff the paint, as it would ruin the finish.

Step 12
You could give your car a refined look by applying some car wax meant specifically for a matte finish.

Matte Paint Care
After painting your car matte black, it is very important to take care of the finish. Matte colors, unlike gloss or chrome, need a lot of maintenance. Here are some basic tips that will help protect the color of your car.

Dos and Don’ts

  • Do not use any product meant for normal paint. Look for matte specific car care products.
  • Matte finish looks good because of its less shiny and flat appearance. Do not use polish and rubbing compounds, as you don’t want to end up turning the matte to a gloss finish.
  • Do not get your car washed at an automatic washing center, as the brushes and shine enhancement products can permanently damage the matte paint.
  • For spot cleaning, use a microfiber cloth and an alcohol-based window cleaner. Wipe the surface with a gradual forward-backward motion, and rinse later to eliminate the remains of the cleaner.

Washing

  • Always spray your car with a hose before applying the matte-specific car shampoo.
  • Wash the vehicle lightly, working in small sections in a bottom-top direction. Rinse each soapy section before moving to the next. Continue in this manner until the whole car is completely washed. Use a soft microfiber or chamois cloth while washing, and avoid the use of any kind of brushes.
  • Post washing, do not allow it to air-dry, as it would lead to the formation of water stains, Instead, use a damp microfiber towel and wipe down the whole car dry.
  • Use matte specific paint protection products to retain the paint’s finish longer. A lot of car care brands, like 3M or Swissvax, manufacture such products. Do remember to read the product-use instructions carefully before applying.

If you are really tight on budget, but still wish to make your old car look new, invest some time and paint your car as per these instructions. Don’t forget to leave your feedback in the comments section below. We’d love to hear about your new-look drive.

Tips to Choose a Paint Color for Your Car

Is it accurate to say that you are considering repainting your auto, yet not ready to pick which shading will look great on your vehicle? You will locate an extensive variety of paint hues for autos in your adjacent auto paint shop, making it considerably more hard to pick the proper one.

The car paint color has direct relation with the car’s appearance. The type of color largely contributes to the car’s gloss, finish, and shine. If you go to the auto paint shop, you will be spoiled for choice. However, with some simple guidelines, you can easily select an appropriate color for your car.

Choosing Colors for Cars
You can choose a single color or opt for blending different shades of several colors. It all depends on how you want the car to look.

Standard Look

If you do not want the car to look too colorful or vibrant, you can choose standard colors such as black or white. There is no car that will look dull in these colors, provided that the paint is properly finished.

Vibrant Look

If you want to choose colors apart from the standard ones, there are a variety of shades, such as yellow, red, green, blue, maroon, silver, beige, brown, etc. These scream for attention, if that’s the effect you intend to achieve.

Sporty Appearance

If you want the car to have the look of a sports car, you can choose bright colors such as blazing red, sporty yellow, orange, green, etc. You can even choose black or white for this purpose.

Customized Shades

If you do not want to choose from the regular, conventional colors, you have the alternative to ask for your own customized ones. The trend of using these on cars is increasing day by day. Today, professionals are able to mix and match any colors of your choice. You can choose from flat, one-dimensional, fluorescent, or metallic colors.

Cool Graphics

Along with the paint, you can also choose to have graphics on the surface. This really gives a totally different and unique appearance to the vehicle. Flames, broken glass, peeping eye, etc., are most commonly used graphics.

Match With Interiors

One important thing that you need to consider is that the color should also match the car interior. If you have chosen a particular color for the exterior, it is better to have an interior of the same or corresponding color shade.

As Per Climatic Conditions: It is always better to choose a color according to the climate you reside in. If you are staying in a very hot climate, choose lighter colors that will not attract heat. For cold climates, you surely can go in for darker colors.

Practical Choice: In case you are not certain about keeping the car in future, it is suggested to choose typical, standard colors. It is normally a bit difficult to sell off a bright green or fiery red car. In such a case, you will have to get it repainted.

If you are still confused, you can pay a visit to an automobile paint shop. Ask for pictures of your car model, but with different colors. This will certainly give you an idea as to which color system to go for.

How to Chrome Spray Paint for Cars

Applying chrome splash paint is a perfect approach to give another look to your auto. Chrome paint, when connected in the correct way gives a dazzling appearance to your auto.

An easy way to change the overall appearance of your car is by painting it. However, just any paint won’t give that unique shine to your vehicle. Application of chrome paint can provide that lustrous shine to your car. Chrome is the favorite color, when it comes to giving a shiny reflective coating to any vehicle. These are high quality paints often used by many car manufacturers. Of course, just one coat is not enough to get those satisfactory results. Usually, application of 3-4 coats is recommended to obtain that brilliant chrome finish. To make sure that the reflectivity of the paint is not affected, the metal is sometimes covered with a conductive over coating.

Why to Use Chrome Spray Paint

There are many features of chrome spray paint that distinguishes it from other ordinary car paints. They are discussed below:

Scratch Proof
If you are using your fingernail to scratch a car that has been given a makeover with a chrome spray paint, then just forget it. This is because the paint is scratch resistant and so there is no way that fingernails or tree branches scraping alongside the car would cause scratches. Thus, the beauty of the car remains intact, even when it is plying on a road that is dotted with long tree branches. So, in case you are looking for a solution to protect your car from scratches, opting for chrome spray paint would certainly serve the purpose.

Rust Protection
Chrome spray paint is formulated to protect your car from rust. Made from anti-corrosion coating compounds, chrome spray paint certainly does an excellent job of preventing rust from forming on the car. Ordinary car paints wear away over time, thereby allowing oxygen to react with the metal underneath. This eventually triggers rusting of the metal. However, as chrome spray paint is both durable and corrosive resistant, your car will continue to display a characteristic shine for years to come. No wonder, it is often said that the longevity of real chrome finish is remarkably high.

Easy To Apply
You don’t have to use any sophisticated equipment to apply this paint. Normal equipment like spray guns are capable enough to produce the translucent chrome effect. Also, chrome spray paint is able to reach spots that is not possible even with vacuum deposition paints.

Points to Remember

  • Prior to using the chrome spray paint, you need to remove the dirt from the car surface.
  • So wash it thoroughly using soap water solution.
  • Once it is done, apply a automobile primer as it helps to hold the chrome paint firmly on the surface
  • Now use jet black as the base coat to enhance chrome paint color for a long lasting shine
  • After the base coat layer becomes dry, then only apply the chrome paint.

Types

There are different types of chrome spray paints available in the market, each providing a characteristic effect to your car. It is discussed below:

MirraChrome
MirraChrome is one such popular car paint in great demand amongst car enthusiasts. The main reason being its ability to create a mirror chrome shine. Nowadays, MirraChrome is also used on other surfaces such as wood, plastic and foam. To achieve the best results, it is often recommended to use the standard HVLP spray guns.

Ghost Chrome
Another chrome spray paint that has been popular in recent years is the Ghost Chrome. This paint is generally seen on various OEM (original equipment manufacturers). Thus, you will find this paint on BMW wheels, Ford parts and many more. A standard spray gun is used to apply Ghost Chrome. This popular chrome finish can be given over any color, but normally it is applied over various shades of gray to get that perfect metal reflection. One big advantage of applying Ghost Chrome paint, is that it remains transparent which allows the viewer to see the underlying base color.

MultiChrome
Want to give a new look to your car? If yes, use MultiChrome paint, which is a combination of Ghost Chrome and MirraChrome. It provides a prismatic color change effect that is truly wonderful. When you view a car coated with MultiChrome, you will only see chrome, but on changing the viewing angle, you would see a prismatic color burst. In short, the paint is able to produce a variety of colors when viewed from different angles. This dramatic color effect is due to the presence of patented crystal flakes in the paint.

On the whole, in case your car requires a paint job, a chrome spray paint would be the best option. This is because it produces a dazzling shine, which is long-lasting. It can also withstand the rigors of everyday use. Chrome paint can enhance the look of your used car, in a way that no other paint can. So if you are looking for that ultimate finish for your car, then go in for a chrome spray paint.

Essential Auto Detailing Tips

Disregarding opportune auto support can prompt to ugly looking outsides and filthy insides, which will cost a considerable measure when you select to get it took a shot at. Along these lines, here are some itemizing tips and traps that will help you keep up the look of your auto.

Wash
Washing is one of the most important part of detailing. Doing this carefully is essential to maintain the color and shine of your car. While most of you might be just picking up the dish soap or detergent to wash the car, let me tell you that is absolutely damaging to the paint on your car, making it fade, or worst case scenario, even chip off. Opt for a high quality automotive shampoo, as it is specially formulated to remove off all the dust and grime, without affecting the paint. These shampoos also make your vehicle shine. After you wash your car, using a good shampoo, you need to wipe off all the moisture from the surface. Do so using microfiber towels, or those made of chamois leather.

Wax
Once you are done with the washing, it’s time to wax your car to protect the paint and enhance its looks. Waxing will maintain the posh look by protecting the surface. Make sure the car is dry and dust free. Take a good quality liquid wax and spray it on the body paint. Then, buff it with a soft towel or chamois leather. You can also opt for a ‘wax-off’ towel to buff the wax perfectly. Remember not to apply wax on plastic or steel exterior components, it must cover painted surfaces only.

Interior Cleaning
You must vacuum your car thoroughly, as each corner and area needs to be worked on to get rid of dust. Even though you may be vacuuming your car every month, it is not enough. You need to do it every week. For leather upholstery, it is best to opt for a pH-balanced leather cleaning product. Try it on a small area before using. You can also opt to keep this task of cleaning upholstery and rest of the car interiors to a professional.

These aforementioned tips will surely help you keep your vehicle in top-notch condition. While giving your car to a professional for deep cleaning or any other services, make sure you opt for the best services, even if you have to pay a little more for it.

Vinyl Paint for Car Interior Tips

unduhan-7Painting the insides of an auto is a simple employment, and nothing can be preferable for this over vinyl paint. You will have the capacity to change the whole look of your vehicle from within. This article makes you through the strides of painting the auto insides.

Vinyl paint can give your car a new look from the inside. Moreover, you will get that feel-good factor while driving your vehicle. You can get a dashboard color you always wanted to have. If you want to do an affordable makeover to your vehicle, then you can opt for painting the interiors, especially the dash, door panels, leather items, and other plastic areas. It promises to give your vehicle a new life.

Procedure

To paint the dashboard, you will need to remove the peripherals like the gear shift knobs, radio knobs, ashtray, heater vents, etc. You may also want to wash them in warm soapy water. Make sure that they dry well, you can also use a blower to dry them. Then, with a clean cloth and soapy water, wash the dashboard, steering wheel, door knobs, etc. You may need to brush a little harder, maybe with a scrub to get the dirt off properly. Then, rinse the dashboard and dry it with a clean cloth.

If you don’t want some areas to be painted, you can apply masking tape on areas like the radio gauge, etc. Painter’s masking tape is the best for these kinds of jobs as it can be peeled off easily and it doesn’t leave any residue behind. To apply paint on hard plastic areas, you may first need to rub it gently with a fine sandpaper. Then, using a soft, dry cloth, wipe off the dust which was produced by the sandpaper. Wipe it once more with a wet cloth, which will make sure that there is no dust on it. Lastly, using a clean cloth and rubbing alcohol, wipe the plastic and the dashboard, this will make sure that there is no residue on it.

Before you start painting, be sure that it has dried so that the paint sticks effectively. Use a good quality primer on the areas you want to paint. Read the manufacturer’s directions for best results. Another important aspect is the type of paint you use. If you want to apply it on plastic, use a paint which is suitable for plastic, and likewise for other material. Vinyl plastic paint may produce better results. For the dashboard, you can use vinyl dash paint. Follow the manufacturer’s directions for better results for the paint as well.

If you’re thinking of applying it to the seats, then make sure you use the right product for it, as there are products out there specially made for these purposes. You may use vinyl upholstery paint for this. After applying one coat, let it dry thoroughly, undisturbed. Let the windows down so that it dries properly. It may take 24 hours or more for it to dry. After finishing, the interiors must be looking like that of a brand new vehicle. Install the peripherals which you had removed earlier back. Test the controls to make sure they’re working right. You can also consider changing your vehicle’s interior design.

What Products to Use?

Not many think of painting the inside of a new vehicle; you can do it if you want to lighten up the color a bit. You can use duplicolor vinyl or vinyl spray paint for the job. Most of the products available for these jobs come in spray cans, hence it becomes simpler for you to apply. Depending upon the shade you want, apply multiple coats if required. The more coats you apply, the darker the shade will be. While spray painting, keep the nozzle at a distance of about 16-18 inches and apply it in a smooth back-and-forth motion.

The prices of hiring a professional can be relatively high, so you may consider doing it at home, which will help you to save a lot. After completing the job, make sure that you take proper care of your vehicle by taking few simple precautions like protecting the vehicle from direct sun, protecting the dash, etc. Using a window sun blocker will help to a great extent. With proper care, the paint will last for years.

Tips to Custom Car Painting

Some time ago car paints were extremely restricted similarly as the shades of hues were accessible. Autos in the prior days were accessible either in essential white or dark shades. In any case, as the interest for the hues developed, so did the experimentation for the same to the extent auto producers were concerned.

Today, car painting does not mean choosing only the right shade. One has to consider factors such as whether the paints are rust-free and scratch-proof. There are many different qualities available. Here, cost is also an important factor. For example, the polyurethanes are generally at a higher end. There are also lower-grade qualities available of this kind. This is because of a certain pigment used in them that makes it a tad expensive. The least quality is that of the acrylic enamels. The difference between them, apart from the price factor, is the durability of the paint. If you take a trip through any company that specializes in custom car paint jobs, you can get a variety of such paints available with their various categories and prices.

Every painter has his/her own recipe. People have even known to change the basic look of the car or even the performance of the car (by replacing the engine) if they want a custom car as per their desire. This always adds a personal touch to the model. Once the basic body structure is changed, the paint always remains to be the most important step. The 1960s saw the use of wildly colored candy apple paint applied atop a metallic coat. There was also an addition of glitter and the use of multiple coats that produced a sparkling effect. These car enthusiasts were also known to add decorative coats of paint in the shape of flames, pinstripes etc., over these coats.

Logo Designs

Apart from long flames on the car, paint also got a new twist in the story. Today, there is a growing demand for logo designs. These are mainly popular amongst most car and bike enthusiasts as they can change the entire look of a plain car into a very eye-catching one. Many people use these logos as a representation of the company or for personal use. Here, the painter has to take care that the color scheme used for the logo should match the basic color and look of the car. Most people today love to go in for a fiery car paint color that is bold and makes a statement. These can even be seen at a longer distance. Serif fonts or delicate fonts are generally avoidable. This is because they may not always be visible at a distance. If the reasons are professional and you need to display a website address, always consider the font and use contrasting colors for better readability.

When it comes to automotive logo designs, one has to consider the objective of the design, the quality required, and the extent to which your creativity can be unleashed. Sometimes, the designers use the different components of the car such as the handles, steering wheels etc., to display some more creative logos. Some of them break the traditional norms and implement trendy designs that look very creative and bring a ‘designer’ touch to the car.

Now that people are becoming interested, a lot of manufacturers are providing many more variations of car paints and colors. Now, the trend has shifted to high-tech, color-shifting paints that also change hue as the car is rotated in the light. Such paints contain little flakes of pigment that bring about the change in color. These are especially popular whilst painting graphics and creating different backgrounds. They are also useful on the interiors of the car.

A Guide Car Painting for Car

The car business has been a noteworthy casualty of the subsidence. On the off chance that you are considering eliminating your costs, then your auto is certain to be the main casualty. You begin ignoring the minor issues of your auto, overlook giving it a costly paint work.

Tips and Techniques

Step 1: Gathering Material
Make a list of things that you will need, beforehand, and keep them ready. Here is a list of things that you will need.

  • Plastic sheets or waterproof canvas for covering the car.
    Detergent.
  • Sandpaper for sanding down the surface of the car.
  • Primer (the quantity depending upon the size).
  • Paint. There are two types of paint, cellulose based and two pack automotive paint. Choose the type of paint depending upon the age of the car. For old, classic cars, it is preferable to use cellulose based paint, and for newer cars, it is preferable to use two pack automotive paint.
  • Clothes, mask and goggles for covering all the exposed areas of the body.
  • Sprayer for spraying the paint on the car.
  • Clear coat kit to give the finished look to the car.

Step 2: Cleaning
It is absolutely imperative to work on a clean car, whenever you are getting a paint job done. This is because dust is the greatest enemy of wet car paint. Once the dust is settled on the wet paint, it is impossible to remove it. So, the first and foremost step recommended is to wash your car properly, so that any unwanted foreign material is removed.

Step 3: Sanding Down
The paint should only be applied to a smooth area. For this, you will have to sand down the car. The surface of the car has a tendency to have some fine holes in it. You can use putty to fill up these fine holes, and then proceed to sand down the car. Use a sandpaper to do this. In this step, all the colors should be scrapped down.

Step 4: Preparation Before Painting
You cannot apply paint on a wet surface. Make sure that the car is completely dry before painting it. Next would be to cover the area of the car that you don’t want the paint to get on, like windows, windshield, car interiors, etc. Use the waterproof material that you gathered before, for this purpose. Use a masking tape to keep the material in place.

Step 5: Priming
A primer is something that is applied before painting. A primer is necessary for better adhesion of the paint. Priming should be done in an indoor setting only. Care must be taken that there is adequate ventilation also. See to it that you are well clothed, so that there is no exposed skin surface.

Step 6: Painting
Before you begin painting the car, sand down your car again. All the primer must be removed. This is because the paint has to be applied to a smooth area. Hence, scrubbing down all the primer is important. Make sure that there are is no area on the car that hasn’t been sanded down. The surface must be completely smooth before you apply the paint.

Using a sprayer, you a can apply the first coat of car paint to the car surface. Apply the first coat smoothly all over the surface for the car. Once this is done, it is important to let the paint dry. This should take about 20 minutes. Now you can apply the second coat. The second coat should also be applied smoothly all over the car. The paint now needs to dry properly. Two hours should be sufficient for this.

Step 7: Clear Coat
The procedure to apply the clean coat is the same as that of the paint. Just apply smoothly all over the surface of the car. It is advisable to apply three coats of clear paint, with a gap of at least 20 minutes between each clear coat. After this, let the car dry for at least 2 hours. Your car should now look brand new! Note that in the tips mentioned above, none of the steps can be skipped. So, follow them properly.

There are numerous car painting techniques, but the tips given in this guide are designed to give your car a perfect paint job. Follow them and get a brand new looking car.

Ways to Paint a Car

Painting a vehicle is not as troublesome the same number of individuals think, if you take after the directions fastidiously. In this article, different strides with respect to the method to paint an auto are talked about.

When you have plans for painting a car on your own, one thing is for sure that the result is really rewarding and satisfying, and will save you a lot of money too. It is the best way to change the look of your vehicle. Even if you have never done this kind of paint job before, you can succeed in your venture, provided you have the patience to comply with all the relevant instructions.

Step # 1

No matter how well-maintained your vehicle is, it is exposed to loads of dust, grime, and debris. Therefore, the first step is to wash your car. This is done to ensure proper adhesion of the paint. Firstly, wash your vehicle with soap and water. This will clean up all the loosely bound particles from the body. Then, apply a grease remover to get rid of the stains and marks that are insoluble in water. Liquid charcoal starter or mineral spirits can also impart effective results.

Step # 2

Rough, scratched, and dented surfaces of the car’s body prevent the required finish after painting. Thus, you have to treat them with sandpaper in order to smoothen them up. Identify all such spots on the car that require some amount of repairing or sanding. If the rough surface area is large or the scratch marks are deep, then you can rub with a loose grit sandpaper. For small patches, where minor sanding is required, a fine grit will be just enough. Any kind of minor or major dents on the vehicle body should be mended before you take up the paint job. Putty material is the best choice for filling up such dips, and to make the surface leveled. After this repair work, you should do another round of sanding to make the repaired patches smooth. If you find lots of dust on the surface due to this method, wash it once more.

Step # 3

Your paint job can be started only after your car has dried up thoroughly. For this, even if you have to wait for few hours, do not hesitate to do so. Cover up all the portions of the vehicle where painting is not required, like mirrors, glass, window frames, door handle, etc. Masking tape is the best option for this purpose. Make sure there are no holes and gaps in the tapes, through which paint can seep into those areas.

Step # 4

Now that your car is ready, you can begin the paint work. It should start with the application of a primer. This is responsible for making a strong bond between the vehicle surface and the paint layers, so that the latter will last for some more time. Read the instructions given on the label of the primers carefully. Some varieties require application of double coats. Apply the ones on all the areas on the car, where paint has to be applied. Make sure that the primer is spread evenly on the surface. Keep its coat slightly thicker on those areas, where repair work of dent and scratches were done. This will make those surfaces even. Let the primer cure up completely. It often happens that small lumps and dips are caused by such compounds. These uneven surfaces should be smoothed out by another round of sanding.

Step # 5

Urethane based paints are the best ones for your car. Firstly, apply a base coat of paint using a spray gun, and allow it to dry up for about 15 minutes. Then, put another coat of paint. Normally, two coats are sufficient to get the desired effect. However, if you have selected any such paint that has instructions to apply it more than two coatings, then do it accordingly. The second coat needs a couple of hours to dry. When the final coat of paint has dried up, you have to give it a finishing touch by applying a clear coat. It is normally applied three times, and in the same way as of the previous ones. Allow the car to dry for one and half hours or so.

There should be proper ventilation in the place where the paint job will be carried out. You should gear up with suitable precautions to protect yourself from harmful fumes of the paint and of the primer. Choose loose fitting clothes that will cover your entire body well. Masks and eye glasses are also a must for this kind of work.

Ways to Touch Up Car Paint

Knowing about touch up paint technique is essential, in the event that you possess an auto. Minor scratches and imprints can at whatever time demolish its magnificence. Anyway, what do you do in such cases? Gaze at that scratch and feel miserable? All things considered, that is of no utilization.

Touch up paint is the ultimate way to clear a scratch and have a clean surface. As I mentioned above, knowing the procedure is just helpful in such cases. If you wonder that you need to take professional help to clear those small scratches or repaint the rusted areas, then you are wrong! All you need to do is follow some easy steps mentioned below and do the job yourself.

Step-by-step Procedure

Before we start off, make sure you gather the required material. Masking tape, masking paper, sandpaper, primer, base coat and clear coat are the basic things that you need for this job. Choosing the right color is an important step as well. A wrong shade will make it noticeable. But, remember that there’s much more than choosing a right shade and painting the scratch.

Step 1
Start the procedure by parking your car in the shade. Clean your car by washing it with a specially formulated car shampoo, and dry it. Dry the area on which you will be working thoroughly. Mask the area around the damaged part to avoid spilling or spreading of paint over it.

Step 2
Now, take a high grit sandpaper and sand the damaged area. Make sure that you sand the area and at least 1½ inches more all around the scratch thoroughly. Now, wipe the area with a soft cloth.

Step 3
Take a paint brush and apply the primer over the scratch. Let it dry. Apply one more coat of primer. You can apply up to 4 coats with a gap of 10 minutes between each coat.

Step 4
Here’s the main step of this procedure. The base coat is basically the paint color matching with your car’s original color. Once you have bought automotive paint, make sure you test it on a hidden surface. This will help you decide whether the color is matching with original color of your car. Remember that this is an important step to have a well-blended look.

Step 5
Now, softly sand the primed area. Next, take the color and apply it over the primed surface. You can apply 3-4 coats as required. Make sure you keep a gap of 20-30 minutes between 2 coats for drying. You can choose to use a paint can and brush or a spray paint for repainting the damaged area.

Step 6
Finish the procedure by application of clear coat after the base coat (paint color) dries off.

If the scratches are not reworked on time, the open surface might start rusting. Rust can further ruin the appearance of your car. So, it is best to know how to carry out the procedure and work on the scratches on time. This will not only avoid further damage but also restore the looks of your car.

If you are wondering about the cost, then let me tell you that it is just the total cost of material you buy while you do the job yourself. Professional car painting prices will vary depending upon the depth and dimension of the scratch. Well, let me tell you, learning how to paint a car is much easier after you master the touch up job. Just the canvas you work upon is huge in case of complete car paint job. No matter how small a scratch on your car is, refinish it on time and enjoy a plush, clean drive.

Tips to Paint Aluminum Wheels

Have the aluminum wheels on your vehicle gotten to be dull and blurred with wear and tear? All things considered, perhaps the time has come to paint them once more. In this article, we let you know the means that you have to take after to paint aluminum wheels.

With everyday driving, wear and tear, and also because of time, the aluminum wheels on your vehicle can become dull and look nothing like their shiny earlier self. The scratch on the wheels and the dents on them can pull down not only the appearance of the wheels themselves but of the vehicle as a whole affecting its value in the bargain. Getting a new set of wheels can be an expensive proposition and getting a paint job done by a third person, while considerably cheaper, can still be a burden on your wallet. Learning to paint aluminum wheels can make the entire process could become cost-effective. This article will give you the instructions that you need for this do it yourself project.

Painting Aluminum Wheels

In order to paint aluminum wheels, you first need to strip it off any existing coat of paint. Once you have done that you will need to prime it to ready it for the paint job. Painting aluminum wheels does not mean that you simply spray them. If not done properly, the paint could chip off within weeks. Once you have painted the wheels, ensure that you polish the aluminum wheels properly. This is something that needs to be done regularly to protect them from damage.

Things You Need

  • Rubbing Alcohol
  • Rags
  • Newspaper
  • Paint Stripper
  • Glass Container
  • Paint Thinner
  • Car Wash Liquid
  • Bristled Brush
  • Sandpaper
  • Primer
  • Paint
  • Clear Paint
  • Water
  • Gloves
  • Safety Glasses

Instructions

  • In order to paint aluminum wheels, the first thing that you need to do is to wash the wheels properly with soap and water. Scrub the wheels to remove any dirt or grime that is stuck on it. Then allow the wheels to dry.
  • The next step would be to strip the wheels of any paint. For this you will first need to remove the wheel covers from the tire and then rub it with rubbing alcohol.
  • Clean the wheel covers with a newspaper to wipe off any alcohol residue. Now place it on a newspaper so that you can use the paint stripper without spilling it on the ground.
  • While using the paint stripper, ensure that you use the gloves and the safety glasses. Always pour the paint stripper in a glass jar and dip the brush in it. Apply this on to the area from which you want the paint removed.
  • Once the paint stripper has set, the paint will start flaking and you can remove it using a bristled brush and a cloth rag. If you want to remove any existing paint or remnants of the paint stripper, just use a cloth soaked in thinner on the wheel.
  • You now need to sand the wheel to prepare it for the primer coat. Use a sandpaper to do this. This will also help remove any marks from scuffing.
  • While applying the primer, whether you are spraying it on or applying it using a brush, ensure that you put on at least three coats. Ensure that before you apply a second coat, you allow the earlier coat to dry.
  • Now you can apply the paint to the wheels. Ensure that you wait for twenty four hours after you apply the primer to apply the paint. Like the primer, you will need to apply at least three to four coats of paint. Depending on which color you want, you can select one but it may be a good idea to choose one that is of a metallic silver shade.
  • Once the paint is dry, apply two to three coats of clear paint, which will protect the paint on your wheels from chipping.

    With these instructions you should have no problem repainting them in order to make them look new and shiny. After all, no one wants to be driving around a car that is not attractive and that does not draw stares from passersby.